background image

 

PR

ECAUT

I

ONS

 

 

z

  Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, 

laundry tub, swimming pool or in a wet basement. 

z

  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, 

it can injure a person and cause serious damage to the appliance. Use only a 
cart or stand recommended by the manufacturer or sold with the monitor. If 
you mount the monitor on a wall or shelf, use a mounting kit approved by the 
manufacturer and follow the kit instructions. 

z

  Slots and openings in the back and bottom of the cabinet are provided for 

ventilation. To ensure reliable operation of the monitor and to protect it from 
overheating, be sure these openings are not blocked or covered. Do not place 
the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor 
near or over a radiator or heat register. Do not place the monitor in a bookcase 
or cabinet unless proper ventilation is provided. 

z

  The monitor should be operated only from the type of power source indicated 

on the label. If you are not sure of the type of power supplied to your home, 
consult your dealer or local power company. 

z

  The monitor is equipped with a three-pronged grounded plug, a plug with a 

third (grounding) pin. This plug will fit only into a grounded power outlet as a 
safety feature. If your outlet does not accommodate the three-wire plug, have 
an electrician install the correct outlet, or use an adapter to ground the 
appliance safely. Do not defeat the safety purpose of the grounded plug. 

z

  Unplug the unit during a lightening storm or when it will not be used for long 

period of time. This will protect the monitor from damage due to power surges. 

z

  Do not overload power strips and extension cords. Overloading can result in 

fire or electric shock. 

z

  Never push any object into the slot on the monitor cabinet. It could short 

circuit parts causing a fire or electric shock. Never spill liquids on the monitor. 

z

  Do not attempt to service the monitor by yourself; opening or removing covers 

can expose you to dangerous voltages and other hazards. Please refer all 
servicing to qualified service personnel. 

z

  To ensure satisfactory operation, use the monitor only with UL listed computers 

which have appropriate configured receptacles marked between 100 - 240V AC, 
Min. 5A. 

z

  The wall socket shall be installed near the equipment and shall be easily 

accessible. 

 
 
 

 
 
 
 
 

 

 

Important Recycle Instruction: 

 

Lamp(s) inside this product contain mercury and must be recycled or disposed 
of according to local, state or federal laws. For more information, contact the 
electronic industries alliance at WWW.EIAE.ORG. For lamp specific disposal 
information check WWW.LAMPRECYCLE.ORG. 

 

6

Summary of Contents for PX2210MV


























Reviews: