Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the following. If the problem
persists, please contact your local dealer or our service center.
Problem: No image appears on screen.
►
Check that all the I/O and power connectors are correctly and well connected
described in the "Installation" section.
►
Make sure the pins of the connectors are not crooked or broken.
Problem: Partial Image or incorrectly displayed image.
►
Check to see if the resolution of your computer is higher than that of the LCD
display.
►
Recon
fi
gure the resolution of your computer to make it less than or equal to
1280 x 1024.
Problem: Image has vertical fl ickering line bars.
►
Use "Fine" to make an adjustment.
►
Check and recon
fi
gure the display mode of the vertical refresh rate of your graphic
card to make it compatible with the LCD display.
Problem: Image is unstable and fl ickering
►
Use "Horizontal size" to make an adjustment.
Problem: Image is scrolling
►
Check and make sure the VGA signal cable (or adapter) is securely connected.
►
Check and recon
fi
gure the display mode of the vertical refresh rate of your graphics
card to make it compatible with the LCD display.
Problem: Vague image (characters and graphics)
►
Use "Fine" to make an adjustment. If this problem still exists,
use "Horizontal size" to make an adjustment.
14
Summary of Contents for PT1745R
Page 1: ...PT1745R PT1745S PT1745RPF Touch Screen LCD Monitor USER S GUIDE www planartouch com...
Page 7: ...Installation Product Overview Front View Bottom View 4 RS 232 VGA AC IN AUDIO USB POWER SWITCH...
Page 10: ...Figure 7 1 7...
Page 13: ...Remove the Deskstand Remove 4 screws and then remove hinge 10...