Planar PS4652, User Manual

Page: 40 / 64

The OSD (On-Screen Display) menu 38
Setting menu
Language English
Schedule
Power Save
ECO
Control Setting RS-232C
Network Settings
Set Monitor ID
01
HDMI Control Off
Advanced
Information
All Reset
Setting
:Move :Enter :Exit
ENTER
EXIT
Item Description
Language Sets your preferred language for the OSD menu.
Schedule
• Date and Time : Sets the current date and time.
• Clock Display : Sets whether to show the current time which was set.
• Input : Sets an input source to display when the display is automatically turned on next
time.
• On/Off Timer : Sets when to turn on or off the display.
Notes:
• Set the current time before you set the On/Off Timer .
• When schedule settings overlap, the Everyday setting takes priority over other weekly
settings.
Power Save
Sets the display to enter the power saving mode when there is no signal detected.
•
Standard : All sources can enter the power saving mode and wake up the display.
• ECO : All sources can enter the power saving mode, but only a VGA signal can wake up
the display or you have to press the power button to wake up the display when other
sources are connected.
• Off : If no source is detected, the backlight will continue on.
Note:
• RS-232C can bring any mode out of the power saving status.
• On
Power Save setting ECO , the LAN function is not available if the monitor enters Power
Save, or DC off mode.
Control
Setting
• RS-232C / LAN : Sets a terminal to control the display.
• IR : Select it when multiple displays are connected via RS-232C cables.
- Primary : Designate the display as the primary unit for remote control operation.
Only this display will be operated by the remote control.
- Secondary : Designate the display as the secondary unit. The display can not be
operated by the remote control, and will only receive the control signal from the
primary display via the RS-232 connection.
Note:
• To reset to the default settings ( RS-232C ) for Control Setting , press the INFO button on
the remote control for 5 seconds.
• The power of the secondary display can not be turned on by the control signal received from
the primary display.
Network
Settings
See "Network connection" on page 21 for details.