DLP
®
Projector – User’s Manual
Installation II Menu
Press the
Menu
button to open the
OSD
menu. Press the cursor
◄►
button to move to the
Installa-
tion II
menu. Press the cursor
▲▼
button to move up and down in the
Installation II
menu. Press
◄►
to change values for settings.
Item
Description
Auto
Source
Press the cursor
◄►
button to enable or disable automatic source detection.
(Range: On – Off)
Auto Power
Off (min)
Press the cursor
◄►
button to enable or disable automatic shutdown of lamp after
a set number of minutes. (Range: 0 ~ 180)
Auto Power
On
Press the cursor
◄►
button to enable or disable automatic power on when AC
power is supplied. (Range: On ~ Off)
Fan Speed
Press the cursor
◄►
button to toggle between normal and high fan speed.
Set Fan Speed to High in altitudes over 1500 meters (5000 feet).
Lamp
Mode
Press the cursor
◄►
button to choose the lamp mode.
Range: Eco and Normal.
Eco mode uses less power and extends lamp life, but decreases lamp brightness.
Normal mode uses more power and reduces lamp life, but increases lamp bright-
ness.
Advanced
Press
Enter
/
►
to enter the Advanced menu.
See “Advanced Feature” on page 32.
Factory
Reset
Press
Enter
/
►
to reset all items to factory preset values.
Status
Press
Enter
/
►
to view the current display status (these items are display only).
See “Status” on page 34.
–
31
–
