9
Quick Installation
1.
Connect either VGA or DVI Source from the monitor to the computer. Make sure both
monitor and computer are powered OFF. Please note. The monitor ships with VGA cable
only. DVI cable may be sourced separately from a cable supplier.
2.
Connect power cord to a properly grounded AC outlet, and then to the monitor.
3.
Power-ON computer and then POWER-ON the monitor.
4.
Set the timing mode on your computer. Recommended resolution and refresh rate is
1920 x 1080 @ 60Hz.
Figure:
Power cable
VGA
cable
PC
DVI
cable
