6
Installing the Display Controller
To install the controller
1 Turn off your computer and all
peripherals. Disconnect all cables
from your computer. Leave the
power cord plugged into the
grounded outlet.
2 Remove the computer cover.
3 Remove any existing graphics card
and video signal cable, if necessary.
4 Remove the blank bracket from
the a
vailable PCI Express slot.
5 Insert the controller into the slot,
align the connector pins, and
press the board down until it
is fi
rmly seated.
6 Secure the mounting bracket.
7 Reattach the computer cover
and the peripherals.
Remove any existing graphics card and its driver from your computer system
before you install the controller and driver. Also disable any onboard graphics
capability on the motherboard. See safety precautions on page 2.
Open PCI Express slot
Blank bracket
Controller installed
020-0545-00A_2.indd 6
020-0545-00A_2.indd 6
2/22/07 11:09:10 PM
2/22/07 11:09:10 PM
