Planar PE1700, User Manual

Page: 16 / 29

- 14 -
Adjusting the “Clock/Phase” Submenu
To adjust the “Clock/Phase” submenu you should follow the steps below:
1.
Bring-up the OSD “ Main Menu ”.
2. Use ‘ Up (
△
) ’ (or ‘ Down (
▽
) ’) to move forward (or backward) to the clock/phase icon and
highlight it.
3. If ‘Clock’ is selected, you may use ‘ Up (
△
) ’ or ‘ Down (
▽
) ’ buttons to adjust the setting of
clock. The fullness of the graphic bar as well as the numerical value at the right corner is also
changed accordingly.
Note:
We recommend you perform the Auto Setup first. And adjust the clock setting only if
the image looks incorrect.
If ‘Phase’ is selected, you may use ‘ Up (
△
) ’ or ‘ Down (
▽
) ’ buttons to adjust the setting of
phase. The fullness of the graphic bar as well as the numerical value at the right corner is also
changed accordingly.
Note:
We recommend you perform the Auto Adjust before adjusting the phase.