Planar PDP 42, Product Manual

Page: 3 / 55

I n s t a l l a t i o n
- Caution
I n s t a l l a t i o n
- Warning
I n s t a l l a t i o n
- Warning
3 3
Do not install the PDP where
water (rain) drops can enter
the enclosure, or where
there is oil or humidity.
·
It may cause an electr ic
shock, a fire, failure or trans-
formation.
Do not use or keep it in a
place where combustible
sprays or inflammable
materials are kept.
·
It may cause an explosion or
a fire.
Do not install in poorly
ventilated locations such
as bookcases or closets.
·
It may cause a fire due to
high temperature.
Do not place the electric
cord or the plug near an
electric heater.
·
The coating on the electric
cords and the plug may melt
and cause a fire or an electric
s h o c k .
Install the antenna firmly
and away from high-volt-
age wires and communi-
cation cables.
·
If the antenna touches the
hi gh- voltage wi re, it may
cause an electric shock or a
fire.
Do not put candles, mos-
quito incense, cigarette
lighters, a heater, or any
other source of heat on or
near the PDP.
·
It may cause a fire.
The PDP should be installed a
small distance away from walls
or other solid objects in order
to maintain ventilation and to
prevent heat damage. Blockage of the ventilatior with
table covers or curtains can
ca use a fire d ue to the
increased temperature inside
the monitor. Be sure to install the monitor
on a level surface.
W a r n i ng : Serious injury or fatal injury may occur, if the indicated warning is not followed.
C a u t i on : Minor injury or product damage may occur, if the indicated caution is not followed.
Do not place any liquid and
foreign objects on or above
the PDP.
·
It may cause an electric shock
and a fire. Contact your dealer
for service.
Do not install the PDP in an
unstable location with a
smaller support area than
the PDP. It may fall and
cause injury.
·
It should be installed on a flat,
stable location.