background image

20

               

LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)

Appendix

Troubleshooting the Monitor

If you are experiencing trouble with the monitor, refer to the following. If the 
problem persists, please contact your local dealer or our service center.

Problem:

 No image appears on screen

Make sure the brightness is not turned all the way down.

• 

Make sure all data and power cables are properly connected to the 

• 

monitor and to the computer and power supply.

Make sure the pins on the cables and connectors are not crooked or 

• 

broken.

Make sure the computer is functioning properly, and has not entered 

• 

power-saving mode. (You may also want to disable the computer’s 
power-saving feature.)

Problem:

 Partial image or incorrectly displayed image

Make sure the computer’s image resolution is set to one of these 

• 

resolutions: 1024 x 768 (XGA) (LX1201PTI only), 800 x 600 (SVGA) or 640 
x 480 (VGA).

Problem:

 Image is scrolling

Check and make sure the VGA signal cable (or adapter) is securely 

• 

connected at both ends. 

Initiate an auto-sync to solve the problem.

• 

Problem:

 The monitor does not appear to respond to the touchscreen

Make sure the USB cable to the computer is securely connected at both 

• 

ends. 

Summary of Contents for LX0801PTI































Reviews: