Planar LookThru Transparent OLED Display User Manual
020-1380-00D
Page | 50
Navigating Through the Menus
25.2 System Settings Submenu
Enable Status LED
Turns on status LEDs
Pixel Orbit
Turns on pixel orbit. This moves the entire screen randomly by up to 10 pixels to
lessen the onset of burn in.
Inverted Mount
Rotates the OSD when an inverted mount is used
IR Remote Code
Identifies the remote code address used. Refer to the
IR Command Protocol
section
DisplayPort Type
Set the version of DisplayPort that is used by the system
Options:
1.1, 1.2;
Default:
1.2
Keypad Lock
Lock or unlock the keypad. When it is enabled, all keypad presses will be ignored.
Options:
Enable, Disable;
Default:
Disable
IR Remote Lock
Lock or unlock the remote control. When it is enabled, all remote control presses will
be ignored.
Options:
Enable, Disable;
Default:
Disable
Factory Reset
Return the saved settings in a system to their factory defaults
Firmware Update
Update the firmware for the display. Refer to the instructions on the firmware release
package for more information.
