1.3 — About the Invitium
™
optional battery pack
The Invitium Battery Pack is a system option that supplies a reg12 VDC to the
Invitium Medical Workstation.
The battery pack contains a sealed lead acid (SLA) battery, medically certified universal input
power supply, charging and monitoring electronics, and output voltage regulator. It is contained
within a plastic enclosure with all components mounted to an internal sheet metal frame to
provide mechanical strength as well as EMI/EMC protection and shielding.
The battery pack provides up to eight hours of system operation at a nominal load of 60 watts.
Recharge time is less than four hours.The charging and monitoring electronics control the
charge rate of the battery as well as the maximum discharge level.This is to ensure safe opera-
tion of the battery and to prevent damage from high charge rates and low discharge levels.
The Invitium system’s battery pack is certified by Underwriters Laboratories to medical stan-
dard UL2601-1 and C22.2 No. 601.1 M1990 for sale in the U.S. and Canada.The system is also
CE marked for use in the Europe.
For a full list of battery pack specifications, please refer to Section 5:Technical Specifications in this
manual.
The Invitium Medical Workstation is a Class I system under the MDD, intended for near-patient
proximity use. It is not intended for direct connection to the patient.
1.4 — Safety Instructions
The Invitium Medical Workstation is designed to ensure both the highest level of product quality
and safety for the user.To maintain both quality and safety, follow the instructions in this manual
and these safety guidelines.
1.
Read the safety and installation guidelines carefully.
2.
Keep this manual handy for future reference.
3.
Install and use the Invitium system only on a sturdy surface and in stable surroundings.
4.
Do not place the Invitium workstation near a window. Exposing the system to rain, water,
moisture or constant direct sunlight can severely damage it.
5.
Do not place anything on top of the monitor-to-computer signal cord. Make sure the cord
is placed where it will not be stepped on.
6.
Do not apply excessive pressure to the monitor screen. Excessive pressure may cause per-
manent damage to the display.
7.
The Invitium workstation has no internal user-serviceable parts. Refer all servicing to
qualified personnel to maintain your warranty.
8.
Do not cover or obstruct any venting holes on the computer or the monitor.
9.
Store the Invitium system within –20 to +65 degrees Celsius. Storing the system outside
that temperature range could result in permanent damage.
10. If any cord or cable is frayed or damaged, immediately replace it with another of the same
type and rating as supplies by Planar.The safety and regulatory listing and certifications are
based on cables supplied by Planar.
4
Invitium
™
Medical Workstation
O P E R A T I O N S M A N U A L
Invitium Manual LAYOUT 3/26/02 9:35 AM Page 4
