Turning the Display Off
EP Series Ultra HD LCD Displays User Guide
23
Turning the Disp lay Off
With the power on, press the power button on the remote or side control panel to
put the LCD panel in a standby mode. To turn off power completely, turn the AC
switch to “O” or disconnect the AC power cord from the power outlet.
Note:
If there is no signal for a certain period of time, the LCD panel will automatically go into
standby mode.
Adjusting the Vo lume
1
Using the remote, press the
VOLUME
- or
VOLUME
+ to increase or decrease the
volume.
2
Press the
MUTE
button to temporarily turn off all sound. To restore the sound,
press the
MUTE
button again.
Note:
The analog audio out is variable. S/PDIF is fixed.
Selecting the Inp ut So urce
Do one of the following:
• Using the remote, press the desired source button
(DP1, DP2, HDMI1, HDMI2,
HDMI3, HDMI4, OPS, VGA).
• Press the source button on the display’s keypad. Use the arrow buttons (
c
T
) to
select one of the following input sources and press
ENTER: DP1, DP2, HDMI1,
HDMI2, HDMI3, HDMI4, OPS, VGA).
Note:
When the display cannot find a source, a “No signal” message will appear.
Navigating Thro ugh the Menus
1
With the power on, press
MENU
.
The
INPUT
menu appears.
2
Within the menu, use
c
,
T
,
W
,
X
and
ENTER
to navigate through the menus and
adjust options.
3
Press
MENU
to return to the previous menu. To exit the menu system, press
EXIT
.
