Planar Bobcat X SN-4045-WX, User Manual, Page: 85 / 157

78
Step 3. Check to see if the source
is a solid color.
If the source is not a solid color and none of these steps have resolved the problem,
contact Planar Technical Support.
If your picture is visible, but something is wrong with it
Symptom Possible Cause Explanation / Further Action
Image is rotated Check your source. The Bobcat X has no way of rotating images.
Picture has a black edge Picture is not positioned correctly. Use the Picture Position menu to adjust it
(see “Adjusting Position” on page 43)
Check LCD alignment (see “Aligning the
LCD” on page 51).
Check LCD size (see “Adjusting Focus and
Image Size” on page 53).
Picture has a black or col-
ored edge The source has a black edge
Wall Mode is turned on and the picture is not
the same aspect ratio as the wall. The edge
color is determined by the Border Color in
this menu Check the Aspect Ratio and Wall menu (see
“Aspect Ratio Settings” on page 35)
Picture is too large or too
small This could be a zoom adjustment, particularly
if you are using Planar’s Big Picture™ Check the two Zoom menus and set them
both so you see a zero on all four sides. Then
check the two Viewport menus and see that
they read zero on all four sides (see “Zoom
and Position” on page 61)
Picture is noisy
Picture has horizontal or
vertical streaks Cable from source is poor quality or too long Use a different cable
Poorly adjusted Phase and/or Frequency Only analog computer signals may need this
adjusted. This can be done automatically by
pressing S
ETUP
on the remote.
If your screen is a solid color, but not black (Continued)
Do This Result Explanation / Further Action
Te s t P a t te r n s
N o n e C u s t o m C o l o r
W h i t e G r a y S c a l e G r i d
R e d R e d S c a l e
1mp
A l i g n m e n t D a s h e s
G r e e n G r e e n S c a l e 4 x 4 C h e c k e r b o a r d
B l u e B l u e S c a l e U n i f o r m i ty
B l a c k C o l o r s F o c u s
G r a y C o l o r B a r s L o g o