13
Planar Battery System BAT24SI
QUICK LINKS
GETTING STARTED
USING THE BATTERY
MAINTAINING THE BATTERY
APPENDIXES
To reinstall the battery system
1
Install new batteries into the tray. Replace both batteries at the same time.
Do not mix old and new batteries
2
Reconnect the battery cables to the controller board and to the four battery
terminals. Be sure that cable and terminal connections match RED-to-RED and
BLACK-to-BLACK. Push in each connector until you feel the connection click.
3
Reattach the retaining bracket with the two Phillips screws.
4
Push the battery tray all the way into the enclosure.
5
Reinsert the fuses. Use the flathead screwdriver to make a quarter turn
clockwise to secure each connection. Do not overtighten.
6
Plug in the power cord, USB cable, and power output cable.
7
Reinsert the Phillips screws on the back and front of the enclosure.
