Plamen International Dora 10, Technical Instructions

Page: 41 / 44

Item
No.
PART DENOMINATION
Item
No.
PART DENOMINATION
101
102
103
104
105
106
107
108
109
110
201.1
201.2
202.1
202.2
203
204
205
206
207
208
209
210
211 212
213
301
303
304
401
402
404
405
406
415 Top plate
Baseplate
Frame, large
Glazed door
Small door
Fire grate
Frame, small
Riddling grate
Guard
Cover
DORA 8 shell
DORA 10 shell
NERA 8 shell
NERA 10 shell
Shell bottom
Air flow control
Fire grate protection
Air control holder
Air control
Guard plate
Frame support
Glass holder
Riddling grate rod Small door air flow control
Ash tray
Door handle
Grip
PLAMEN name plate
Brick 1 (P-1)
Brick 2, sloped (P-2)
Brick 4, short (P-4)
Brick 5, (P-5)
Glass
Brick 6, with support (P-6)
REMEMBER:
Avoid slow burning sluggish fires. When reloading, make sure to load a quantity of fuel
that is most suitable in respect of the actual heating requirements.
Every time you fire the stove, make sure that the air control is fully open until active bright
fire is developed. Only then, set the air control to the position corresponding to the
desired heating output.
It is in your best interest to strictly observe these Installation and Operating Instructions.
Install the stove in a room of adequate size to ensure that the rated output of the stove
meets the heating requirements of the room.
When using fuel wood, keep the secondary air control in the position ½ of the max.
range to ensure clean combustion without unnecessary environmental pollution.
THE MANUFACTURER RETAINS THE RIGHT TO ANY MODIFICATIONS
NOT AFFECTING THE FUNCTIONALITY AND SAFETY OF THE STOVE!
41