32
Drying
Drying period active.
Cooling
Cooling period active.
End
Cooling period over. Anti-creasing-period
active.
Filter
Goes on after each use of the appliance
to remember you to clean the filter. If
you do not clean the filter you can run
the appliance but its power will be heavily
reduced. So clean the filter regularly.
Select the programme and function you desire and press
the button to start the appliance. If you open the door
while the appliance is running, the START / PAUSE
button has to be pressed again after you have closed the
door. Now the programme starts at the point from where
it was interrupted before. In such an event the control
light of the START / PAUSE button flashes to remind
you to press the button again.
Each drying period ends with a 10-minute cooling down
period. If you do not take your clothes out of the
appliance after the drying period has ended, the appliance
starts the ANTI-CREASE period ( Max. 30 minutes ). If
you do not take your clothes out of the appliance then it
stops operation automatically.
To change a running programme stop it by turning the
function-control knob to position 0. Now you can select
another programme. Press START / PAUSE .
If it is necessary to stop the drying period before the
programme has ended, we recommend you turn the
function-control knob to position AIR DRY. Then wait
until the cooling period has ended before you take your
clothes out of the appliance. This avoids heat
accumulation. Turn the knob to position 0, then to AIR
DRY and press the START / PAUSE button.
Important
Changing a
programme
End of a
programme
Start / Break
Control lights
(above ►
II
button)
