~
83
~
2.5 Connection of the water inlet hose
Do not use a water connection the water of which is warmer than 50
0
C.
Required water pressure (flow pressure): 100 kPa - 1000 kPa (1 - 10 bar).
1.
Ensure that the rubber washer is in the valve
connector; both ends
24
/ s. fig. on the right.
2.
Attach the
straight
end of the water inlet hose to
the appropriate water connection; s. fig. on the
right.
3.
Put the other end of the water inlet hose into a
bucket or into another suitable container (s. fig on
the right) and open the water tap to flush foreign
substances (e.g. dirt, sand, etc.) out of the water
pipe and of the hose. Check the water
temperature.
Fig. similar
4.
Ensure that the rubber washer
25
is in the valve
connector. Attach the
curved
end of the water
inlet hose to the inlet valve of the washing
machine; s. fig. on the right /
1
. Tighten the water
inlet hose firmly (clockwise) to avoid leakage; s.
fig. on the right /
2
.
24
Depending on model.
25
Depending on model.
Summary of Contents for WA6-ES1015D
Page 19: ... 19 ABB 2 ABB 3 ...
Page 85: ... 85 FIG 2 FIG 3 ...