28
1.
Remove the content from the freezing-compartment and put it into a cooling
box.
2.
Switch off the appliance by turning the thermostat to position 0/AUS/OFF and
disconnect it from the mains.
3.
When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4.
Remove the big pieces of ice first. Afterwards remove the small pieces of ice.
5.
Wipe and dry the appliance and door seals with dry and soft cloths.
6.
After cleaning leave the door open for some time to ventilate the appliance.
Automatic defrosting
(
Cooling compartment)
1.
The cooling compartment is defrosted automatically. The water runs into a
container near the compressor.
2.
If the automatic defrosting does not meet the requirements, e.g. on days with
high ambient temperatures and humidity, defrost the appliance manually as
described above.
5.2 Replacing of the illuminant
WARNING!
The LED-illuminant must be replaced by a competent
person
only
. If the LED-illuminant is damaged, please contact a qualified
professional (
not covered by the guarantee
)
NOTICE!
This products contains a LED light source of energy
efficiency class G according to EU-Regulation 2019/2015.
6. Trouble shooting
The LED will flash one time if there is a failure of temperature control
The LED will flash three times when the door is not closed properly.
MALFUNCTION
POSSIBLE CAUSE
MEASURE
The appliance does not work at all.
➢
The plug of the appliance is not
connected to the socket.
➢
The plug has become loose.
➢
The socket is not supplied with
➢
Check the corresponding socket by
connecting it with another appliance.
➢
Check the fuse box.
