60
NOTICE!
Adjust the door properly before you finally tighten the screws of
the hinge. The seal must close properly.
4. Operation
WARNING!
To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
4.1 Before initial operation
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and pets.
CHOKING HAZARD! RISK OF INJURY!
NOTICE!
Leave the appliance in an upright position for
at least 4
-
6
hours
before you connect it to the mains to ensure, that the oil has
flowed back into the compressor.
NOTICE!
lf you use the appliance for the first time or the appliance has
been disconnected from the mains for a langer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature
setting (s. chapter 4.3
SETTING OF THE TEMPERATURE)
before
you place
any fresh or frozen food in the appliance. lf you place food in the
appliance before it has reached its normal operating temperature, this
food can thaw and / or spoil.
1.
Remove
all
packaging
materials.
2.
Adjust
the
feet and
clean the
appliance (see chapter
CLEANING AND
MAINTENANCE).
3.
Do
not start
the
appliance immediately after installation. Wait at
least
4 - 6
hours
to ensure proper operation.
4.
The settings of
the
temperature of the fridge
can be
adjusted manually.
To
do
this,
turn the thermostat for
the
temperature to the
desired
setting. (s.
chapter
4.3
SETTING OF THE TEMPERATURE).
