~
67
~
I
NSTRUCTIONS FOR THE QUALIFIED PROFESSIONAL
(
ELECTRICAL ENGINEER
)
1.
The LED illuminant should have
cooled down
before you remove it.
2.
Open the extractor hood using the « O
PEN
» - button (
E
/ s. fig. below).
E
B
UTTON FOR THE OPENING OF THE EXTRACTOR HOOD
3.
Remove the used LED illuminant.
4.
Replace the used LED illuminant by a new one of the same type and power: E14
LED 1*4W.
5.
Install the new LED illuminant carefully and properly.
Required minimum distance to surfaces such as pot lids, oven
cloths etc. to avoid any hot parts and risk of fire.
--- m = 0.45 m
Only use self-shielded illuminants to avoid hot parts, risk of fire
and exposure to UV-radiation.
WARNING!
Any damage to the appliance caused by improper
replacement of the illuminant is
not
subject to the guarantee!
