~
53
~
6.
Drill 4 holes (
H
) with a diameter of
7 mm
in the bottom of the installation
cabinet (installation plate /
J
/ s. fig. below). O
bserve the indicated
dimensions!
H
4
DRILL HOLES
Ø
7
mm
J
B
OTTOM OF THE INSTALLATION CABINET
(installation plate)
7.
Align the 4 pre-drilled holes on the top of the extractor hood (
H 1
) with the 4
drilled holes (
H
) of the installation cabinet (installation plate /
J
/ step 6.) and fix
the extractor hood using the appropriate screws (4*M5x40) and washers (4 pcs.)
provided (s.
fig. 7
and
fig. 8
below).
The optimum distance between the extractor hood and the two sides of the
installation cabinet
should be less than 2 mm
for each side. The top of the
extractor hood must fit closely to the bottom of the installation cabinet
(installation plate);
no
gap must remain. The distance between the extractor hood
and the back of the installation cabinet / wall
must not exceed 10 mm
. The
power plug of the extractor hood must be
easily accessible
.
