Pkm GKS 110, Instruction Manual, Page: 60 / 75

60
You can change the position of the hinges.
The working sequence is described below.
When you change the hinge position:
1. Disconnect the appliance from the mains.
2. Empty the appliance completely.
Tools required:
 Crosstip screwdriver

Flathead screwdriver

Hexagonal spanner
You must tilt the appliance backwards to remove the door. Lean the appliance
against a solid construction and block the rollers, so the appliance cannot slide
away while you are working.
The appliance must not tip over or lie on one of its sides. Otherwise you may cause
serious damage to the cooling system.
10. CHANGING THE HINGE POSITION
CAUTION!
The change of the position must be carried out by at least two persons;
otherwise you may hurt yourself or damage the appliance.
GKS 110 / GKS 215 / GKS 250