76
Foam in the appliance.
Unsuitable detergent.
Spilled rinse aid.
Use dishwasher detergent only.
Open the door and wait until the
foam has evaporated. Pour approx. 4
litres of water in the appliance. Close
the door and select the pre-wash
programme. Repeat procedure if
need be.
Stained interior.
Detergent contains colorants.
Use colorant-free detergents.
Dishes are not clean.
1.
Unsuitable programme.
2.
Dishes are placed improperly.
1.
Select a stronger programme.
2.
Check the position of the dishes.
The dishes must not block the spray
arms.
Spots and film on glasses and cutlery.
Extremely hard water.
Very low temperature of the water
supply.
Appliance is overfilled.
Dishes are placed improperly.
Old or wet pulvered detergent.
Rinse aid container is empty.
Improper detergent dosage.
To remove spots from glassware:
1.
Remove all metal-made objects.
2.
Do not use a detergent.
3.
Select the longest programme.
4.
Start the programme. After 18-22
minutes the main-wash cycle begins.
5.
Open the door pour 2 cups of white
vinegar in the appliance (bottom).
6.
Close the door and let the complete
programme run. If this measures fail,
repeat the procedure but use 1/4
cup (60 ml) of citric acid crystals
instead of the vinegar.
Cloudiness on glassware.
Soft water in combination with too
much detergent.
If you have soft water, use less
detergent. Select a short programme
for glassware.
Yellow or brown film on inner surfaces.
1.
Tea or coffee stains.
2.
Iron deposits in the water.
1.
Clean with a solution of 1/2 cup of
bleach and 3 cups of warm water.
Clean by hand.
2.
You need a special filter. Contact a
local water installation company.
White film on inner surfaces.
Minerals in hard water.
Clean the interior with a soft sponge
and dishwasher detergent. Wear
rubber gloves! Use dishwasher