75
2.
Take out the flat filter.
3.
To install the filters proceed in reverse order.
❖
We recommend to clean the entire filter system once a week.
❖
Remove bigger remnants after each programme.
❖
Clean the coarse and micro filter with a washing-up brush.
❖
Do not knock against the filters as you will damage them. Your appliance will not
work properly if the filters are damaged.
❖
Always install the filters properly.
❖
Improperly installed filters may damage the appliance and dishes.
7.2 Spray arms
➢
Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
➢
To remove the spray arm screw off the
nut (anticlockwise). Take off the washer
at the top of the spray arm. Now remove
the spray arm.
➢
Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
➢
Rinse the spray arm with flowing water
and reinstall it.
7.3 Control panel and appliance
❖
Clean the control panel with a soft damp cloth and dry it carefully.
❖
Clean the exterior of the appliance with a suitable polish.
❖
Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean any component
of the appliance.
7.4 Door
❖
Clean the sides of the door with a warm damp cloth.
❖
Clean the exterior surface with a suitable polish.
❖
Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean the door of the
appliance.
