61
2.3 Selection of installation equipment / Dimensions
DANGER!
The appliance must be installed
by a qualified
professional only
. Do not carry out the installation yourself. RISK OF
ELECTRIC SHOCK!
S
AFETY INSTRUCTIONS FOR THE INSTALLATION
NOTICE!
Never seal the hob using a sealant (e.g. silicon). Appliance and
worktop can be damaged when dismounting the appliance.
When installing the appliance ensure optimal heat radiation to maintain the
operating safety.
The wall and the reach of the heat radiation above the worktop must be made of
heat-resistant materials.
To avoid any damage, the sandwich layer and adhesive must resist heat.
Provide an installation opening relevant to the dimensions on the following
drawings. For installation and use, a minimum of
50 mm
space shall be preserved
around the hole. (s. fig. below; D
IMENSIONS OF THE HOB
).
The thickness of the worktop
must be between 40 mm and 50 mm
. Choose
heat-resistant materials for the work top only to avoid any deformation caused by
the heat-radiation of the appliance.
D
IMENSIONS OF THE HOB
:
A
=
H
EIGHT
B
=
W
IDTH
C
=
D
EPTH
50 mm
590 mm
520 mm
