background image

10

WARNING

Make certain your LP (propane) tank is filled by 

a reputable propane dealer. An incorrectly filled 

or an overfilled LP tank can be dangerous. The 

overfilled condition combined with the warming 

of the LP tank (a hot summer day, tank left in 

the sun, etc.) can cause LP gas to be released 

by the pressure relief valve on the tank since 

the temperature increase causes the propane 

to expand. LP gas released from the tank is 

flammable and can be explosive. 

The tank supply system must be arranged for 

vapor withdrawal. 

The tank used must include a collar to protect 

the cylinder valve.

D. teMpeRatuRe-actIvateD sHut-oFF

The large plastic nut on the regulator assembly is 

designed in coordination with a check valve in the 

tank valve to shut off the flow of gas when exposed 

to temperatures between 240°-300° F (115°-148° C). 

In the event  of a fire or hose break, one of the safe-

guards will function to control or stop the flow of gas 

from the propane tank. Never attempt to use damaged 

equipment.

Checking for Gas Leaks

Before operating your oven or after refueling, check  

carefully to be certain that all connections are tight 

and there are no gas leaks.

1.

   Make 3 oz. of leak solution by mixing liquid dish 

washing soap with water.

2.

   Make certain the control knob is in the “OFF” 

position on the oven.

3.

   Brush small amounts of the leak solution on all the 

fittings and turn the gas on at the tank.

4.

   If bubbles appear, there is a leak. Proceed to step 5.

5.

   Turn the gas off at the tank and tighten connections.

6.

   Go back to step 1 to retest the fittings.

7

.   If bubbles continue to appear, turn the gas off at 

the tank. Contact customer service.

Liquid Propane (LP) Tank safety Information

1

.   Up to 20 lb. gas cylinder can be used with the 

oven. The cylinder must be constructed and 

marked in accordance with the Specifications 

for LP Gas Cylinders of the U.S. Department of 

Transportation (D.O.T.) or the National Standard 

of Canada, CAN/CSAB339, Cylinders, Spheres, 

and Tubes for Transportation of Dangerous Goods; 

and Commission. Storing the appliance indoors 

is permissible only if the cylinder is disconnected 

and removed from the appliance. 

2.

   DO NOT obstruct the flow of combustion and 

ventilation air to this appliance.

3.

   Never use the oven without the crumb tray in-

stalled under the burner area. Without the crumb 

tray, hot debris could leak downward and produce 

a fire hazard.

4.

   Do not store a spare LP-gas cylinder under or near 

this appliance.

5.

   Never fill the cylinder beyond 80% full.

Do not store the tanks (whether full or empty) 

inside your home, the living area of an R.V., a 

garage, basement, or in reach of children or 

pets. It is unlikely that liquid propane will leak 

from the tanks. If it should leak, the fuel could 

be exposed to sparks from automobiles, power 

tools, or other appliances. When storing or 

transporting your LP tank, it must remain in an 

upright position. Never lay your LP tank down 

on its side whether it is full or empty. Never 

store a spare tank under or near your gas  

appliance.

Summary of Contents for PizzaQue CS030314






















Reviews: