Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
- Purchase your set
- Find that the remote control is no longer operating
correctly
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking care to
respect the polarities:
on the battery a on the remote control
on the battery against - on the remote control
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
+
-
1
2
3
Do not mix battery types, i.e. alkaline and monganese.
Switching On and Off
Do not mix battery types, i.e. alkaline and monganese.
Plug the mains lead into an appropriate socket.
Result: The screen is turned on and a green Standby indicator appears
on the front of your set.
Your set can be placed in Standby mode, in order to reduce the power
consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
Press the Power
button on the remote control or the front of your set.
Result: The screen is turned off and a green Standby indicator
disappears on the front of your set.
To switch your set back on, simply press the Power
button again.
1
2
Do not leave your set in Standby mode for long periods of time
(when you are away on holiday, for example). Turn your set off by
unpluging from the mains and aerial.
M ENU
Becoming Familiar with the Remote Control
The remote control is used mainly to:
- Change channels and adjust the volume
- Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Menu Function
Button
Viewing Function
Used to display the
next stored channel.
Used to select the
previous menu option.
Used to select the
next menu option.
CH
CH
Used to display the
previous stored channel.
Used to switch repeatedly between the current and the last channel
displayed. (PRE-CH; Previous Channel)
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the "--" symbol is displayed.
Enter the two-digit channel number.
Used to decrease
the volume.
Use to...
- Search forwards manually
for channels
- Reduce a menu option value.
Used to increase
the volume
Use to...
- Search backwards manually
for channels
- Increase a menu option value.
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the - or + button.
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
Used to exit from the menu system and return to normal
viewing directly.
0 ~ 9
8
7
+ -
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.cn