PIXVERS M170Tnw, User Manual, Page: 15 / 16

24
1 640x480 31.47 60
2 720x400 31.47 70
3 640x480 35 70
4 640x480 37.86 72
5 640x480 37.5 75
6 800x600 37.88 60
7 800x600 43.8 70
8 800x600 48.08 72
9 800x600 46.87 75
10 848x480 31.09 60
11 848x480 35 70
12 848x480 36.05 72
13 1024x768 48.4 60
14 1024x768 57.5 70
15 1024x768 57.7 72
16 1024x768 60 75
17 1152x864 53.74 60
18 1152x864 62.98 70
19 1152x864 67.5 75
20 1280x768 47.69 60
21 1280x768 55.99 70
22 1280x768 57.7 72
23 1280x768 60.11 75
24 1280x1024 63.99 60
25 1280x1024 74.61 70
26 1280x1024 76.81 72
27 1280x1024 79.98 75
Mode Resolution
Horizontal
Frequendy(KHz)
Vertical
Frequency(Hz)
REFERENCE
Display Modes
Appendix
Troubleshooting
Please use the following table to resolve the most common possible causes of the problem
before calling service personal. A minor adjustment may eliminate the problem and restore
your TV reception.
Symptom
Corrective Actions
1.Check signal cable connection with computer.
2.Check that power is turned on, or that power adapter lamp is it.
3.Adjust brightness and contrast.
4.Check input signal of TFT-LCD.
5.Check the power connection to the unit with screen.
1.Check that Video cable is plugged in.
2.Refer to the Picture Adjustments Menu in the
. OPERATING INSTRUCTIONS
1.The power could be failing, try connecting the unit to another
power outlet.
2.Move unit a way from the magnetic equipment, such as a Wireless
Receiver, AC Transformer.....ECT
3.Refer to the Picture Adjustment Procedure Menu in the
. OPERATING INSTRUCTIONS
1.Check that the Video cable is plugged in securely.
1.Check Video input range(V-sync:Max 75Hz,H-sync:Max 79.98KHz).
2.Make sure Video cable connections are secure.
1.Check speaker connections.
2.Sound might be muted, try adjusting the volume.
1.Check for light or obstacle interference with remote
control signal and move unit to another location.
2.Batteries are dead; replace batteries with new ones.
Contact your Cable Provider to identify the type of Cable Service
that is supplied to you.
From TV SETUP mode, select the appropriate setting and Re Run
AUTO PROGRAM.
Adjust & buttons to set TV programs system. SOUND IMAGE
Turn off power, Press and hold the VOL+botton on the top of the unit
and hit the power button at the same time.
Release the VOL+after you see the volume increasing.
No picture on
screen
Picture is not clear
Image is fuzzy
Color are distorted
Screen bounces
or has wavy
oscillations
No sound
Retome Control
inoperative
Poor Picture
Reception and/or
Poor Sound Quality
When all esle fails
Reset the firmware
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn