Pixsys CNV580-1AD, User Manual

Page: 33 / 88

User manual - CNV580 - 33
7.3.a
System notifications
Each switch button enable/disable corresponding system notification
•
Notify at startup
: send a notiifcation at each power on of the device;
•
Notify at shutdown
: send a notification at each shutdown of the
device
•
Brief power failure detect
: send a notification whenever a power
failure lasting between 20 and 500ms is detected
•
Notify if factory values are wrong
: send a notiifcation in case of any
error in factory setting of the device
•
Notify on parameters error
: send a notification in case any error is
detected in the functioning parameters of the device
•
Notify on state error
: send a notification in case any error is detected
in operation data of the device
•
Notify when AI1 is out of range
: send a notification in case analogue
input AI1detects a value out of permitted range, It could be a sensor
fault or a disconnected wire
• Notify when RS485 goes offline : send a notification in case one or
more devices connected to RS485 should be offline offline;