![background image](http://html1.mh-extra.com/html/pixsys/cnv510-pnet-rtu-a/cnv510-pnet-rtu-a_user-manual_1560851018.webp)
pag. 18
UPDATE DEVICE:
By pressing the “
Update Device
” button it is possible to load the created configuration into the device; and also the Firmware, if is necessary.
If you don’t know the actual IP address of the device you have to use this procedure:
Turn off the Device;
Put Dip2 of ‘Dip-Switch A’ at ON position;
Turn on the device
Connect the Ethernet cable;
Insert the IP “
192.168.2.205
”;
Press the “
Ping
” button, must appear “Device Found!”;
Press the “
Next
” button;
Select which operations you want to do;
Press the “
Execute update firmware
” button to start the upload;
When all the operations are “OK” turn off the Device;
Put Dip2 of ‘Dip-Switch A’ at OFF position;
Turn on the device.
At this point the configuration/firmware on the device is correctly updated.
Figure 6: “Update device” windows
Summary of Contents for CNV510-PNET-RTU-A
Page 4: ...pag 4 MECHANICAL DIMENSIONS...
Page 5: ...pag 5 EXAMPLE OF CONNECTION...
Page 6: ...pag 6 CONNECTION SCHEME...
Page 7: ...pag 7 POWER SUPPLY...