PROBLEM
REASON
SOLUTION
The high salinity light is on
or flashing
1.
Pool salinity is too high
2.
Chlorine generator is faulty
1.
Have the salinity level
tested by pool professional
and decrease to 5,500 if
necesssary
2.
Contact dealer or AIS
Water.
The low salinity light is on
or flashing
1.
Water salinity is too low
2.
Electrode is calcified
3.
Faulty electrode
1.
Have the salinity level tested
by pool professional and
increase it to
4000 ppm if necessary
2.
Clean electrode
(see maintenance)
3.
Have the electrode tested
and replace
if necessary
There is a white powdery
material on the pool bottom.
Excessive water hardness.
Test the water chemistry and
adjust accordingly.
Circuit breaker is tripping.
1.
Mains power surge.
2.
Fault with shorted
electrodes.
3.
Fault with power supply
1.
Set machine to off and
push circuit breaker.
2.
a) Visually inspect
electrode and check for
foreign or conductive
surfaces. If found, remove
and clean cell.
b) Check electrode plates are
not contacting/touching each
other. If yes, replace cell.
3.
Contact dealer or AIS
Water.
TROUBLESHOOTING GUIDE
