Cloning cont’d
Once the units are correctly
lined up, the donor Pixie will
automatically enter cloning
mode.
When the clone Pixie
makes contact with the
donor, its LED will also turn
solid red.
3. Hold the clone unit
steadily in front of the donor
for about 15 seconds. Both
units will chirp rapidly to
indicate their progress. If
the connection is broken
(the clone unit ceases to
chirp), reposition the clone
unit and the Pixies will pick
up where they left off. If
communication is broken for
a significant period of time
(about 15 seconds), the
clone unit will time out and
you will need to begin
cloning again.
4. When the clone unit has completed copying codes from the donor, it will beep
loudly 3 times and reset. You will see all of the button LEDs flicker in quick succes-
sion. After the Pixie has reset it will be fully operational, and it will have learned all
of the codes programmed into the donor unit.
The donor unit will remain in cloning mode for approximately 15 seconds until it
times out. It will then return to normal operation.
VII. Complete Installation
To complete the installation, secure a Leviton
Decora™ wall plate (not included) over the
face of the Pixie. The outer screw holes on the
Pixie should be used to secure the wall plate.
approx. one inch apart
facing each other
15