11
Installation and Wiring
Installation
Note:
Before installation, please ensure the switcher is disconnected from the
power source.
It is recommended that you remove other WiFi hotspot devices nearby (if
any) so to prevent potential interferences on screen projection.
Attaching Antennas
1. Attach the antenna provided to the threaded connector, and screw it
down in clockwise.
2. Repeat the above step for another antenna.
Attaching Installation Brackets
1. Attach the installation bracket to the enclosure using the screws
provided in the package separately.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the switcher.
