24
Note:
•
This Guide Screen picture can be changed though Web GUI setting,
please refer to section
•
By default, when there’s no active source available within 60s, a
countdown timer with the time period of 60 seconds appears on the
guide screen. When the timer ticks to zero, the word “Standby” displays
on the Guide Screen; if the connected display is CEC-supported or
correctly configured with RS232 control commands, its screen will enter
standby mode.
OSD
The switcher supports OSD (On Screen Display) to convey device basic
information, including video source’s information, access code, device name
and IP address, etc. Here are two different OSD examples in different
scenarios.
