14
Front Panel Control
Basic switch of input sources to output displays can be achieved by using
front panel controls.
To select input source for output:
Power on PF-MS82T, now you can select input for each output.
Take HDMI IN2 to HDMI OUT as an example
1. Press HDMI IN2 input selection button, the LED on the top of this
selection button will blink.
Press the input selection button,
the LED will blink
2. Press HDMI OUT selection button within 3s after pressing the input
button, the LED on the top of this button will be lit on, and the LED on
the input selection button will stop blink. Select HDMI IN2 source to
HDMI OUT successfully.
LED stops blinking
Press the output selection button,
the LED will be lit on
Note:
•
If you don’t press the output button within 3s after pressing the input button,
the input LED will stop blinking, and the selection is invalid.
•
The operation selecting other inputs to any output is the same as above
steps.
