9
No.
Name
Description
the "DEBUG" position, connect this port to a RS232
device such as a computer for debugging
NEX-E500.
7
Host
Connect a type A male to type B male USB cable
between this port and the USB port of a desktop or
laptop. NEX-E500 is USB 2.0 compliant.
8
HDMI IN
Connect this port to an HDMI source device.
9
HDMI OUT
Connect this port to a local HDMI display device.
10
IR IN
Connect this port to an IR receiver for IR communication
with an IR emitter at the NEX-D500 side on the network.
11
IR OUT
Connect this port to an IR emitter for IR communication
with an IR receiver at the NEX-D500 side on the
network.
Decoder
Front Panel
5
4
3
2
1
No.
Name
Description
1
Power LED
On:
NEX-D500 is powered on.
Off:
NEX-D500 is powered off.
2
Status LED
On: NEX-D500 is connected to NEX-E500 and the
video is displayed.
Blinking: NEX-D500 is disconnected from
NEX-E500.
Off: NEX-D500 is powered off or in the boot
process. / Network is down.
3
Mode
Use this switch to toggle between normal and debug
modes
.
Normal (Default): In this mode, you can connect the
rear panel RS232 port to a RS232 device such as a
computer for bi-directional serial communication
with a RS232 device on the IP control box side.
Debug: In this mode, you can connect the rear
panel RS232 port to a RS232 device such as a
computer for debugging NEX-D500.
