9 of 12 pages
CH No.
DMX value
Function
CH1
000~255
Dimming(dim→bright)
CH2
000~027
No function
028~255
Strobe(slow→fast)
CH3
000~255
Red (dim→bright)
LED tube 1
CH4
000~255
Green (dim→bright)
LED tube 1
CH5
000~255
Blue (dim→bright)
LED tube 1
┋
┋
┋
CH24
000~255
Red (dim→bright)
LED tube 8
CH25
000~255
Green (dim→bright)
LED tube 8
CH26
000~255
Blue (dim→bright)
LED tube 8
3.Operation by IR remote
You can also operate this controller by IR remote,
the distance available is at most 10M.
Notice:IR remote can be used only when the unit is set to IR remote function on.
The picture of the IR remote:
AUTO RUN mode
Press AUTO RUN button to cycle among color dreaming mode and color jumping mode.Each press of this button
will change to the next mode.
1.When the controller goes into the color dreaming mode,press “+”and “-”to select the 24 color dreaming
modes.Press SPEED to set the color dreaming speed and press “+” or “-” to adjust it.
2.When the controller goes into the color jumping mode,press “+”and “-” to select the 24 color jumping
modes.Press SPEED to set the color jumping speed and press “+” or “-” to adjust it.
Select program Mode
Press SELECT PROG button to cycle among color LED tube select and static color select mode.Each press of this
button will change to the next mode.
1. When the controller goes into the LED tube select mode,press “+”and “-”to select the LED tube.When"STATIC
TUBE:ALL" is displayed means that you can select static color for all the LED tubes,When"STATIC
TUBE:01~08" is displayed means that you can select static color for the corresponding single LED tube.For
