4 of 12 pages
NET MODE U4:
×××××
Set the output DMX universe 4 from 1to 32767
2.1 Manual dimmer color mode
Press"MODE"button,select the manual dimmer color mode.There are three modes in the sound active program
mode.You can select them by pressing the"SET UP" button.
1)
LED tube select mode
Press"SET UP"button, select the LED tube select mode.At this time,the LCD displays "MANUAL TUBE:ALL/
×
×
",then press"UP"or "DOWN"button to select the LED tube.When"MANUAL TUBE:ALL" is displayed means
that you can set the dimming rate for all the LED tubes,When"MANUAL TUBE:01~08" is displayed means that
you can set the dimming rate for the corresponding single LED tube.For example: "MANUAL TUBE:01"represent
the LED tube 1 and so on.
2)
Manual dimmer color select
Press"SET UP"button, select the manual dimmer color select mode.At this time,the LCD displays red"MANUAL
RED:
× × ×
",press the "SET UP" again to choose different color,green"MANUAL GREN:
× × ×
",
blue"MANUAL BLUE:
×××
",then press"UP"or "DOWN"button to set the dimming rate 0-255.
3) Flash speed select
Press"SET UP"to choose the flash speed select mode.At this time,the LCD displays"MANUAL STROB:
××
".Press"UP"or "DOWN"button to select the flash speed 00-15,00 is flash off,01 is the slowest flash speed,15 is the
fastest flash speed.Press SET UP to choose the flash speed select mode.
2.2 Sound active mode
Press"MODE"button,select the sound active program mode.There are two modes in the sound active program
mode.You can select them by pressing the"SET UP" button.
1) Sound active program mode select
Press"SET UP"button until the LCD displays"SOUND PROG:
××
",then press"UP" or "DOWN" to select the
sound active program mode 1-24 under this mode.
2) Sensitivity select mode
Press"SET UP"button until the LCD displays"SOUND SENS:
××
",then press"UP" or "DOWN" to select the
sound active the sensitivity 1-8. 1 is off sound-active,2 is the lowest sensitivity,8 is the highest sensitivity.
2.3 Auto-run program mode
Press"MODE"button,select the auto-run program mode.There are three modes in the auto-run program mode.You
can select them by pressing the"SET UP" button.
1) Color dreaming program mode select
Press"SET UP"button until the LCD displays"AUTO RUN FADE:
××
",then press"UP"or "DOWN"button to
select the 24 color dreaming programs 1-24.
2) Color jumping program mode select
Press"SET UP"button until the LCD displays"AUTO RUN SNAP:
××
",then press"UP"or "DOWN"button to
select the 24 color jumping programs 1-24.
4) Color dreaming/jumping speed select
Press"SET UP"button until the LCD displays"AUTO RUN SPEED:
××
".Press"UP"or "DOWN"button to select
the color dreaming/jumping speed 01-16,01 is the slowest speed,16 is the fastest speed.
2.4 Static color select mode
Press"MODE"button,select the static color select mode.There are three modes in the static color select mode.You
can select them by pressing the"SET UP" button.
1) LED tube select mode
Press"SET UP"button, select the LED tube select mode.At this time,the LCD displays "STATIC TUBE:ALL/
××
