1 5
14
En
En
Remove Knight TR-332TX from the camera
Install the receiver
Knight TR-332RX
Install receiver Knight TR-332RX on the tripod
1
2
SET
POW
ER
Install receiver Knight TR-332RX receiver on the flash bracket
How to use the Knight TR-332
How to use the Knight TR-332
1. Please make sure the camera and Knight TR-332TX power had
been
turned
off
before
remove
TR-332TX.
2. Loose the locking screw by rotating to right according as
the
figure.
3. Pull out Knight TR-332TX
from
the
camera
.
If Knight TR-332TX can’t pull out from the camera's hot shoe:
Knight TR-332TX’s locking screw is not fully loosed, please loose it, and
gently
pulls it from the camera, do
not
forcibly
pull
it
.
1. Follow the picture to insert the receiver screw nut on
the
tripod
,
make
it
tightly
.
2. Follow the picture to install the receiver on the tripod.
1. Loose the locking screw by rotating
to
right
according
to
picture
.
2. Install Knight TR-332RX hot shoe mount to flash bracket according to
picture.
3. Rotate the locking screw to the left for locking tightly according to picture.
