1 7
16
En
En
Install the Knight TR-332RX receiver on the bracket B
Connect the receiver Knight TR-332RX with the
on
-
top
flash
1. Loose the locking screw by rotating to right according to
the
figure.
2. Inserting the TR-332RX
to
the
bracket
B
according
to
the
picture.
3. Rotate the fixed screw of the bracket B for locking tightly according to the figure.
4. Rotate the locking screw of Knight TR-332RX tightly.
How to use the Knight TR-332
How to use the Knight TR-332
1. Please make sure the flash
'
s power is turned off before install the flash into Knight TR-
332RX, confirm the power of Knight TR-332RX is turned on, and set
the
function
mode
and
channel
.
Knight TR-332RX
does
not
allow
the
flash
remove or plug in the under power on
mode
,
the
flash
must
be
inserted
or
pulled
out
in
the
off
state
.
1.Insert the flash and mount into the hot shoe of Knight TR-332RX.
2.Rotate the flash locking switch to the locking position.
Lock the
flash in place, please lock the switch by clockwise rotation until to the
mount locking signs.
