Step 2.
Step 7.
Step 4.
Now insert and tighten the bolt and nut shown below into
the hole circled in red (Do the same for the opposite side).
Step 2.
Step 9.
Step 8.
Step 10.
Instruction Manual
ZIONE 2in1 Convertible Desk and Shelf
Now mount the gas filled tube onto the two bolts shown
below, add spring washer along with a nut, then tighten the
nut until the gas tube is fully secured. (Do the same for the
opposite side).
Once the gas tubes have been installed, pull the frame back
down to the horizontal position, and place the shelves on
top of the frame, then make sure each panel is aligned with
the frame as shown below, before screwing them in.
Once the shelf panels are properly aligned, use the self-tap-
ping screws (shown below) into the slot circled in red. There
are four altogether per shelf (two at the front and two at the
back).
