ASSEMBLY INSTRUCTIONS
Step 5.
Now that the first two rods are in place, in-
sert the second and third rods at a 90° angle
from the first two, to make it a little easier to
insert the rest of the rods later.
Step 6.
Step 7.
Now attach the back panel of the softbox
using the Velcro strips, to prevent light leak-
age from the back of the softbox.
Step 8.
Now that the main structure of the softbox is
complete, attach the inner-diffuser by using
the Vecro tabs at located along the internal
seam of the softbox backing material.
Now insert the remaining rods to complete
the main structure of the softbox. P.S. Please
be aware that the final rod will require a
bit more force to insert than the rest due to
added tension from the other three rods
