Separately sold accessories
The product can be used in combination with the following accessories sold
separately, so as to achieve best photography effects:
ST-III
,
PRO AC 2.4GHz
or
PRO AC 433MHz
remote control, Power Inverter, Softbox, Photographic
Umbrella, Light Stand, Barndoor, Snoot, etc.
When there is flammable accessory on the flash unit, do not keep the
modeling lamp on for a long time. It is recommended to cool it down
for one minute after 10 minutes' working.
1. Built-in 2.4G Wireless Transmission
2. Built-in Wireless Channel
3. Built-in Wireless Channel Dial
4. Slave Model Indicator
5. Beep
6. Temperature Alarm Display
7. Built-in Wireless Group
8. Flash Output
9. Modeling Lamp is off
10.Modeling Lamp is in the PROP
mode
11.Modeling Lamp shows the power in
percentage
12.Modeling Lamp is off when
triggering the flash
LCD Panel
1. Sync Cord
2. Power Cord
3. Standard Reflector
4. Lamp Cover
5. Glass Protection Cover
6. Modeling Lamp
7. Instruction Manual
Accessories
5
4
3
2
1
6
OPERATIONS
Flash Preparation
Power Connection
1. Take down the lamp
cover. Install the modeling
lamp and put on the glass
protection cover and the
standard reflector.
(To uninstall the standard
reflector, press the release
button on the flash head
and turn the standard
reflector counter-clockwise
to take it out, as illustrated
in the picture.)
2. Attach the flash unit onto
an appropriate light stand. Adjust the mounting bracket (16) for a good angle and
make sure it is tightened and fixed. Use the direction adjusting handle (18) to
adjust the flash to a desired direction. Umbrella input (17) is for different photo
umbrellas to put in.
Use the power cord to connect the flash to an AC power source and turn on the
power switch (3).
Short press the Modeling Lamp Button (5) to choose the modeling lamp’s mode
(OFF, PROP and percentage); and long press the Modeling Lamp Button (5) to
switch on or off the function that the modeling is off when triggering the flash.
Modeling lamp will be off automatically after lighting for 4 hours, avoiding
overheat due to long-time lighting when the user is not nearby.
OFF:
Modeling lamp is off.
PROP:
The modeling lamp's power changes with the flash's power. The bigger
power the flash has, the brighter the modeling lamp is.
Percentage:
Adjust the modeling lamp's light brightness manually from 5% to
100%.
Modeling Lamp
-
0
5
-
-
0
6
-
CH
S
%
OFF
PROP
1
7
9
8
6
4
11
12
2
3
5
10
