12
Setting up the Trekker MiniDVR and viewing videos in the field
When setting the Trekker MiniDVR in the field users often
wish to see the camera view. To do this you must supply a
hand held video monitor.
Simple connect the Video Out and Audio Out RCA type
cables to your monitor as shown. With the Trekker system
off move DIP switch 8 into the UP position then power on
the Trekker MiniDVR unit. This will power up both the video
camera and MiniDVR unit.
If you wish the make changes to the MiniDVR such as the
time-date and other features you can do so at this time by
using the MiniDVR remote control unit. Just point it towards
the IR LED on the MiniDVR unit.
You may also play back videos captured at this time.
