If the sliding camera blockers are not compatible with device or case, use PA-SS-1104 Security
Stickers.
STEP 1: Removing Device
Beginning with the bottom edge near the
charging port, press firmly using your
thumbs to disengage the case seal. Continue
carefully pressing around the edges of the
case to release the device in the order shown.
Do not attempt to pry or force the device from
the case.
1. Start at the bottom and move left
2. Continue around the top edge
3. Release the right edge to remove device
STEP 2: Put the stickers to cover the rear and front camera.
STEP 3: Installing Device
Align device camera and buttons with the corresponding access points in the case body
and press the corners of the device into the case in the order shown. The device will snap
securely into the case’s perimeter seal.
!
Pro Tip!
Press firmly around all edges of the front frame to engage the
locking tabs. When pressing each edge into a locked position.
Align device camera and buttons
To learn more about PIVOT cases, mounts and accessories, please visit
pivotcase.com for instructional videos, product support and information about
other PIVOT solutions. You’ll find valuable online resources provided to enhance
your user experience and see the complete line of PIVOT products.
Additional Information
1
1
3
2
4
page: 8
