PA-SS-1104 Security Sticker
!
Pro Tip!
Follow the instructions provided with your case or
locate instructions for your case at pivotcase.com
If the sliding camera blockers are not compatible with device or case, use PA-SS-1104 Security
Stickers.
STEP 1: Removing Device
Beginning with the bottom edge near the
charging port, press firmly using your
thumbs to disengage the case seal. Continue
carefully pressing around the edges of the
case to release the device in the order shown.
Do not attempt to pry or force the device from
the case.
1. Start at the bottom and move left
2. Continue around the top edge
3. Release the right edge to remove device
STEP 2: Put the stickers to cover the rear and front camera.
STEP 3: Installing Device
Align device camera and buttons with the corresponding access points in the case body
and press the corners of the device into the case in the order shown. The device will snap
securely into the case’s perimeter seal.
1
2
3
Top
Bottom
Left
Right
page: 07
