1
RPM x 1000
0
1
2
3
4
5
7
6
8
9
STEPPING DRIVE
User’s Manual
(This Book)
Wiring Chart
(In Japanese)
CHRONOSTEP
STEPPING GAUGE
TACHO METER
ø80
White Extension
Cord
Zip Ties
Part Names and Displays
1
Switch
Use to change modes and/or
settings.
2
Shift Lamp (LED)
Blinks at the set rpm.
3
Needle
Show the current values.
4
Illumination
(night illumination)
Normally illuminated when on
display.
Shows the peak reading after the engine begins running In order to prevent
over-revving while shifting, an F-1 sequential type shift has been included,
which shows a green lamp 1000 rpm before the set engine rpm and a red lamp
at the shift point.
1
3
2
Chronometric D Stepping Motor = Perfection
All Lamps OFF
Normal
1000rpm before
Shift Point
When the key is turned ON the needle will move to the extreme left several times for
searching position. Then it will move to the maximum value and finally to reading for
current measurement item.
Opening Demo
(Setting range; 3000–9000 rpm, 200 rpm unit)
Shift Lamp
Chronometric Display
To the clock-like design of yesteryear we have added a stepping motor that
allows for a peak hold of about 0.5 seconds.
Switch display between Cronometric and Real Display
Engine rotation display can change easily between Chrono metric and
real-time display.
Nostalgic Design
Reprint the nostalgic design of the 1960s.
Sequential Shift Lamp
Includes an easy-to-read shift lamp that comes on 1000 rpm before the set
shift point. .
Compatible with wide range
Compatible with any 12V 1 to 8 cylinder gasoline models and some diesel
models as well.
Translucent Illumination
The translucent LED system provides a clear display of dial and needle even
at night.
Peak Value Display
This enables easy viewing of RPM peak value after engine start.
The lamp in the middle
lights up in green.
The lamps to the left
and right blink red.
(CSG As of February, 2021 No.2)
Contents
Please check the contents of the package
Product
＋
I f t h i s p r o d u c t i s g i v e n t o
an ot h er u s er, m ake sure to
include this User’s Manual.
Thank you for purchasing this PIVOT product.
Please read this manual carefully and keep it for future
reference.
Contents / WARNING / CAUTION
………………
1
Features
………………………………………………
1
Part Names and Displays
…………………………
1
Connecting The Wires
………………………………
2
Installing The Product
………………………………
2
Settings
………………………………………………
3
Basic Operation / Basic Flow of Operations
……
4
Troubleshooting
……………………………………
4
Meter
5-pin Power Cable
with fuse 3A
Adjustable
Stand
Allen
Wrench
Double-sided
Tape × 2
Cushion
Tape
Cut Connectors
× 4
USER’S MANUAL
Product Number
:
CSG
(
)
Features
• Do not work in areas where
there is excessive exhaust.
Due to vehicle exhaust emission
poisoning or fire may result in a
damage to humans.
• Do not crush the cable.
Please be careful that the cable
does not get crushed by the seat
rail or car door steel plate, nor cut
by any sharp steel plate as this may
c a u s e a p o o r c o n n e c t i o n o r a n
electric short leading to fire or other
danger.
• Do not operate while driving.
Operating or checking the display
during driving may cause an accident;
please use with the utmost consider-
ation for safety.
• Pl e as e s e cur e ly faste n t h e
product to a stable place and
be sure to store bundle away
all wires with tape, etc...
It is very dangerous to pull tangled
wires by force or allow tangled wires
to interfere with driving.
• This product is for DC12V cars;
Installation cannot be carried out on cars with
other voltage batteries.
• Just after installation do not exert any
strong force on the product.
When double-sided tape is used for an installa-
tion be warned that when hot the tape tempo-
rarily losses adhesiveness.
• Do Not Use Chemical Cleansers.
If the unit gets dir ty please wipe with a soft
cloth to remove any dirt. Do not use chemical
cleansers such as thinner, benzene, or alcohol.
• Do not install the product in any
place subject to high temperature
or any place where water may be
splashed.
• Make sure to replace all screws and
parts to their original place.
• Do not install the product in a place
where it will cause distraction.
• Do not , in any manner, process,
take apart, or make changes to this
product.
WARNING
Improper use or disregard of these warnings
may result in the injury or death of people.
CAUTION
Improper use or disregard of these warnings may cause
injury to persons, damage the product and other things.
From the 1920s to the 1960s racing cars around the world used a
chronometric tachometer. We have reproduced that sleek styling
with a modern stepping motor to bring you a tachometer that can
easily switch to real display.
