Piusi PW-LAN, User Manual

Page: 5 / 21

24 M0270 EN
EN
4.2 GENERAL SAFETY RULES
Essential
protective
equipment
characteristics
Wear protective equipment that is:
• suited to the operations that need to be performed;
• resistant to cleaning products.
Personal
protective
equipment that
must be worn
safety shoes;
close-fitting clothing;
protection gloves;
safety goggles;
instructions manual
DANGER The Device is not an anti-explosive type
The device must be installed outside areas at risk of
explosion
Do not install in areas where flammable vapors may
be present
DANGER The device must be installed under a roof or in any
environment, protected from rain
ATTENTION The device must be mounted vertically with the grom-
mets facing down
DANGER Installation operations are carried out with the box
open and accessible electrical contacts. All these ope-
rations have to be done with the unit isolated from the
power supply to prevent electrical shock!
All work related to electrical installation must be per-
formed by qualified installer electrical or electronic.
Wear insulated gloves for electrician.
ATTENTION
As a general rule of electrical safety is always recom-
mended to power the device protecting the line with:
- Switch / breaker with adeguate ampacity to the
power line
- RCD (Residual Current Device) of 30 mA
ATTENTION Devices must be professionally installed by qualified
and authorized installer and it is the professional instal-
ler’s responsibility to make sure the device is operated
within local country law and regulatory requirements
ATTENTION The device is intended for use only by professional
staff and authorized