background image

22 

 

 

 

 

 

 

 

             M0270 EN

EN

2 CONFORMITY

2.1  DECLARATION OF CONFORMITY 

   

(94/9/CE, All. VII)

The Manifacturer: 

PIUSI S.p.A

Via Pacinotti 16/A   z.i. Rangavino

46029 Suzzara - Mantova -  Italia

HEREBY STATES under its own responsibility, that the equipment described 

below:

Description: PW-LAN module

Model : PW-LAN

Serial number: refer to Lot Number shown on CE plate affixed to product

Year of manufacture: refer to the year of production shown on the CE plate af-

fixed to the product

is in conformity with the legal provisions indicated in the directives:

- Electromagnetic Compatibility Directive 2004/108/EC  

- Low-Voltage Directive 2006/95/EC  

The documentation is at the disposal of the competent authority following 

motivated request at Piusi S.p.A. or following request sent to the email address: 

[email protected] person authorised to compile the technical file and draw 

up the declaration is Otto Varini as legal representative.

     

        Suzzara, 01/01/2013 

 

 

Otto Varini

     legal 

representative.

GENERAL WARNINGS

Important 

precautions

To ensure operator safety and to protect the pump 

from potential damage, workers must be fully acquaint-

ed with this instruction manual before performing any 

operation. 

Symbols used 

in the manual

The following symbols will be used throughout the 

manual to highlight safety information and precautions 

of particular importance:

ATTENTION

This symbol indicates safe working practices for opera-

tors and/or potentially exposed persons.

WARNING

This symbol indicates that there is risk of damage to the 

equipment and/or its components.

NOTE

This symbol indicates useful information.

Manual pres-

ervation

his manual should be complete and legible throughout. 

It should remain available to end users and specialist 

installation and maintenance technicians for consulta-

tion at any time.

Reproduction 

rights

All reproduction rights are reserved by Piusi S.p.A.  The 

text cannot be reprinted without the written permis-

sion of Piusi S.p.A.

THIS MANUAL IS THE PROPERTY OF Piusi S.p.A.

ANY REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.

Summary of Contents for PW-LAN






















Reviews: