13
/124
13
/20
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
delphin PRO_X QUICK GUIDE
translated from italian
4 CUSTOMIZE THE SYSTEM
Customizing the SYSTEM means using the OFFERS options to make its use
easier, more convenient and more precise.
ACCESS TO THE CUSTOMIZATION MENU, OFFERS THE POSSIBILITY
OF:
- SELECT THE UNIT OF MEASUREMENT.
- MODIFY the calibration factor (K Factor).
- MAKE CALIBRATIONS IN THE FIELD WITH RECIPIENT GRADUATED
- MAKE A DIRECT MODIFICATION OF THE CALIBRATION FACTOR.
To access the various customizing functions and select the desired options,
two different actions are possible on the keys:
This symbol indicates the necessity
to press the key briefly
with conse-
quent release.
This symbol indicates the necessity
to press and keep pressed the key
for
a few seconds.
+
TO ACCESS THE MENU, PRESS AND SET THE «RESET» AND «ENTER»
BUTTONS LONG AS THE DISPLAY SHOWS THE «TOTAL» WRITING ON
THE DISPLAY.
The SYSTEM displays:
To exit the personalization menu, whatever the activity you are in, press
RESET. The settings displayed at that moment become immediately op-
erational.
SELECTING THE UNIT OF MEASUREMENT
The SYSTEM allows the user to select one of the following Units of Mea-
surement:
LIT = LITERS
GAL = GALLONS (U.S. Gallon).
QTS = QUARTS
The above-mentioned Units of Measurements refer to the Batch total indi-
cation.
When the DISPLAY displays:
Blinking
Press ENTER to go to the next Unit of Measurement.
Keep on pressing ENTER until the desired Unit of Measurement is displayed.